Cleaning Your Tv; Screen, Frame, Cabinet, And Stand; Power Cord; Troubleshooting - LG 28LN500B Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MAINTENANCE
n

Cleaning your TV

Y
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
Before cleaning, turn the power off and disconnect the power cord and all other cables.
y
When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
y
outlet to prevent possible damage from lightning or power surges.

Screen, frame, cabinet, and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
y
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners,
y
or lubricants, as these may damage the screen's finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
y
malfunction.
Do not use any chemicals as this may deteriorate the surface.
y

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

TROUBLESHOOTING

Cannot control the TV with
the remote control.
No image display and no
sound is produced.
The TV turns off suddenly.
Problem
Check the remote control sensor on the product and try again.
y
Check if there is any obstacle between the product and the remote control.
y
Check if the batteries are still working and properly installed (
y
Check if the product is turned on.
y
Check if the power cord is connected to a wall outlet.
y
Check if there is a problem in the wall outlet by connecting other products.
y
Check the power control settings. The power supply may be interrupted.
y
Check if the Off Time / Sleep Timer feature is activated in the TIME settings.
y
If there is no signal while the TV is on, the TV will turn off automatically after
y
15 minutes of inactivity.
MAINTENANCE / TROUBLESHOOTING
Solution
21
to
,
to
).

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido