Before First Use - Imusa B120 Manual De Instrucciones

BEFORE FIRST USE

• Remove all packing material and stickers from the product and save instruction manual.
• Cut and remove tie wrap located between the electric plug blades.
• Before using your new appliance, wipe the body of the appliance with a damp cloth.
• Wash all the removable parts with warm sudsy water. Rinse and dry thoroughly.
• Place appliance on a flat stable surface.
Caution: Because some countertop finishes are more sensitive than others, use care not to place
espresso maker on surfaces where heat may cause damage.
• Make sure switch is in the OFF position (0).
• Check that the coffeemaker is not hot, and unscrew it by holding the boiler with one hand and the
pitcher counterclockwise with the other.
turning
• Remove funnel and fill the boiler with fresh water until reaching the safety valve (visible inside the
boiler) without filling past it.
Note: Do not use the coffeemaker without water in the boiler. Also do not put hot water in the boiler for
faster operation.
• Insert the funnel in the boiler.
• Tighten the coffeemaker securely. Hold the boiler with one hand and turn the pitcher clockwise
with
the other hand, without pushing on the handle.
• Place the coffeemaker on the base. Close the lid.
• Plug into a standard 120 Volt AC outlet.
• Press the switch ON (I). The light will indicate that the coffeemaker is on.
Caution: Do not open the lid to the pitcher during the brewing process as scalding may occur.
• Brew the water through the appliance without adding coffee grounds. This removes any dust or
residue that may remain in the system from the manufacturing process.
• The water will start to be released after a few minutes.
6
Cafetera Eléctrica para Expreso
MANUAL DE INSTRUCCIONES