Machine Operation - Nobles Speedshine 1700LS Manual De Operación Y De Piezas

OPERATION
Handle
Release
Lever
FIG. 2.
8. Plug power supply cord into a grounded wall outlet
( Figure 3. ).
Grounded
3 Hole Outlet
Ground Pin
FIG. 3.
FOR SAFETY: Do not operate machine unless
cord is properly grounded.
FOR SAFETY: Do not operate machine with the
use of an extension cord.

MACHINE OPERATION

FOR SAFETY: Do not operate machine unless
operator manual is read and understood.
1. Lift handle so scrub head is parallel to floor.
ATTENTION: Use caution when beginning to
operate machine. Machine will jolt if proper
instructions are not followed.
2. For Dual Speed Models select desired motor
speed . Position switch downward (185rpm) for
scrubbing/ stripping OR position switch upward
(300rpm) for spray buffing ( Figure 4. ).
FOR SAFETY: When using machine, go slow on
inclines and slippery surfaces.
8
NOTE: Start out in slow speed until you are
comfortable with operating .
3. Start machine by pressing safety lock button and
turning twist grips forward. Release thumb from
safety lock button once machine starts ( Figure 5. ).
4. To move left, slightly lower handle and machine
will move left. ( Figure 6.A ) To move right, slightly
raise handle and machine will move right ( Figure
6.B ). Work machine with a side to side motion
when operating.
A
Speedshinet 1700LS/1700HD/1700DS/2000LS/2000HD/2000DS (11–99)
300rpm
Speed
Select
Switch
185rpm
FIG. 4.
Safety Lock
Button
FIG. 5.
B
FIG. 6.