Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts
with package contents list and diagram above. If any part is missing or damaged, do not
attempt to assemble, install or operate the product. Contact customer service for
replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors
and utility knife
ASSEMBLY INSTRUCTIONS
Camlock installation.
For correct installation, screw A-1 must be inserted
and tightened in the pre-drilled hole. Camlock A-2
must be inserted into the pre-drilled hole with the
cross positioned in the direction of screw A-1.
1. Locate the Left Front Panel (B), Right Front Panel
(C), Center Front Panel (D), and set out face down
on a scratch-free surface.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Push the Left Front Panel (B) and Right Front Panel
(C) snug to the Center Front Panel (D). Make sure
the Wood Dowels are seated in the pre-drilled holes.
Connect the Left Front Panel (B), Right Front Panel
(C) and Center Front Panel (D) with Connection
Plate, tighten Screws (EE) and Screws (BB) through
the pre-drilled holes.
Hardware Used
Screw
BB
Wood Dowel
CC
Screw
EE
Fig. 1
x 2
x 4
x 4
4
EE
D
CC
C
BB
B
Publicidad
