Facom Y.135F Guía De Instrucciones página 13

1. REMOVE NOSE HOUSING:
Unscrew the Nose Housing Nut by hand and slide Nose Housing off the tool.
2. REMOVE JAW GUIDE TO ACCESS JAWS AND INTERNAL PARTS:
Pull back the Jaw Guide Lock to disengage the Jaw Guide Lock teeth and unscrew and remove the Jaw Guide.
Remove Jaws, Jaw Pusher, and Jaw Pusher Spring for servicing.
3. CLEAN PARTS:
Clean Jaws, Jaw Guide, Jaw Pusher, Spring and thread area of the Pulling Head.
Apply Seal Lube to outside surface of Jaws and inside surface of the Jaw Guide.
4. REASSEMBLY OF INTERNAL PARTS AND JAW GUIDE:
Place the Jaws into the Jaw Guide and slide the Jaw Pusher Spring and Jaw Pusher into the Pulling Head.
Apply a small amount of Seal Lubricant to the Pulling Head threads and Jaw Guide Lock teeth. Screw the Jaw
Guide onto the Pulling Head until the teeth on the Jaw Guide Lock stop the Jaw Guide rotating.
Apply Jaw lubricant to the Jaw area by submerging the assembled Jaw Guide into Jaw lube about 1 in. (25mm).
Clean off excess Jaw Lube from the outside of the Jaw Guide.
5. REINSTALL NOSE HOUSING ASSEMBLY:
Refi t the Nose Housing and Hand-tighten the Nose Housing Nut securely against the O-Ring. If the Nut is not tightened suffi ciently against the
O-Ring there may be a loss of suction.
MANDREL COLLECTOR SYSTEM
For safety purposes, removing the Collector from the tool automatically turns the MCS suction OFF. Refi tting the Collector turns the
MCS suction ON.
CLEANING THE COLLECTOR SILENCER
For optimum performance, the Collector Silencer should be cleaned at regular intervals as per the"Preventative Maintenance Schedule".
! Note: UNPLUG AIR SUPPLY while servicing Collector to avoid INJURY. !
1. CLEAN THE COLLECTOR :
• Remove and empty the Collector A by turning counterclockwise.
• Remove the Collector End Nut B (17 mm wrench) and remove the Collector End Cap C .
• Remove the Collector Silencer D .
• Clean and remove debris from all components.
COLLECTOR BODY
A
COLLECTOR END E
Suction ON
COLLECTOR SILENCER D
Suction OFF
COLLECTOR END CAP C
COLLECTOR END NUT B
13