Clock Functions; Turning The Alarm On/Off; Setting The Volume - Amplicom TCL200 Guia Del Usuario

C
LOCK FUNCTIONS

Clock Functions

Certain functions require entering test mode before setting.

Turning the alarm on/off

Turn the alarm on/off rotary knob clockwise for On.
Counterclockwise for Off.

Setting the volume

Caution: The alarm and telephone ringer begin sounding at a low volume.
The volume will then increase to the set maximum until the alarm is turned
off or the telephone is answered.
Turn the volume rotary knob to set the maximum volume for the
alarm and telephone ringer. Set the volume to a quiet setting to
start and increase it slowly to the desired maximum volume.
Caution: Exposure to the alarm at full volume for a long period could cause
ear damage.
For test mode
Turn the alarm on/off switch to the on position. Turn all switches on the back of
the clock to their far right position (when looking at the back of the clock). Press
and hold the Snooze button and plug in the clock. Press the snooze button
again to activate Test Mode.
12
Service Center