Amplicom TCL200 Guia Del Usuario página 13

Selecting the acoustic signal
Clock must be in Test Mode before selecting the acoustic signal.
Turn the acoustic signal rotary knob to required acoustic signal.
Setting the pitch
Clock must be in Test Mode before setting the pitch. Turn the
pitch rotary knob to set the pitch. It may be possible to detect
higher or lower pitch tones even at low volumes.
Setting the clock face dimmer
ON OFF
1 2 1+2
1+2
automatic adaptation is switched off.
Selecting the alarm period
Slide the alarm period switch to select between the alarm periods. There are
three settings available: (from left to right) alarm period 1, alarm period 2, or
alarm periods 1 + 2.
1-866-AMPLICOM (267-5426)
Slide the dimmer switch to activate clock face
DIMMER
dimmer. When set to ON, the brightness of the clock
face is automatically adapted. When set to OFF,
C
LOCK FUNCTIONS
13