SonoSite V-UNIVERSAL Manual Para El Usuario página 9

Figure 2 Turn screws on transducer holder: S Series (on left) and NanoMaxx (on right)
To attach the ultrasound system
1 (NanoMaxx only) Connect the NanoMaxx dock or power-only adapter to the system.
2 Attach the transducer holder to the system.
3 Place the back of the system onto the mounting plate.
The two pegs on the mounting plate pass through the transducer holder and, on the S Series
system, into the two large holes on the system.
4 Turn the screw in each of the four corners into the system until the system is secure. Tighten with
a Phillips screwdriver. See
Figure 3 Turn screws on mounting plate: S Series (on left) and NanoMaxx (on right)
Figure 3.
V-Universal Stand User Guide 5