Step
Program the Remote Transmitter
5
Note: The Transmitter is factory set to Mode 1. The Mode of the Remote Transmitter can be
changed to fi t your type or style of training.
To change the Mode:
1. Referring to the table below, adjust the Intensity Dial
to the Mode you want to use.
2. Turn the Remote Transmitter over.
3. With a pen or paperclip, depress and release the
Mode button. When the Mode button is pressed, the
Transmitter Indicator Light will be solid in color. When
it is released, it will fl ash the Mode selected.
For example, if Mode 5 is desired, adjust the Intensity
Dial to Level 5. Once the Mode button has been
depressed, the Transmitter Indicator Light will be solid, and once the Mode button is
released, the Transmitter Indicator Light will fl ash fi ve times.
Note: Continuous Stimulation will transmit for no more than eight continuous seconds no matter
how long the button is pressed. To reactivate, release and repress the button.
Mode
1
2
3
4
5
10
UPPER BUTTON
FUNCTION
Continuous Stimulation
without Audible Tone.
Stimulation level set by
Dial.
Continuous Stimulation
without Audible Tone.
Stimulation level set by
Dial.
Continuous Stimulation
with no Audible Tone.
Stimulation level set by
Dial.
Continuous Stimulation
without Audible Tone.
Stimulation level set by
Dial. When the button
is released there is 1
second delay followed by
an Audible Tone lasting
for 1 second. If button
is pressed again before 1
second delay, the Audible
Tone is not delivered.
DOG #1
Audible Tone only
LOWER BUTTON
FUNCTION
Nick - Stimulation
level set by Dial
Continuous
Stimulation without
Audible Tone.
Stimulation level 2
steps higher than set
by Dial.
Continous Stimulation
without Audible Tone.
Stimulation level 3
steps higher than set
by Dial.
Continuous
Stimulation without
Audible Tone.
Stimulation level 3
steps higher than set
by Dial.
DOG #2
Audible Tone only
www.sportdog.com
SIDE BUTTON
FUNCTION
Audible Tone only
Audible Tone only
Audible Tone only
Audible Tone only
DOG #3
Audible Tone only
# OF
DOGS
1
1
1
1
3