Specifications; Parts And Accessories - Simplicity Conquest Serie Manual Del Operador

SPECIFICATIONS

ENGINE:
23 HP Kohler
Make
Model
Horsepower
Displacement
Electrical System
Oil Capacity
CHASSIS:
Fuel Tank Capacity
Front Wheels
Rear Wheels
TRANSMISSION:
K66
Type
Hydraulic Fluid
Capacity
Speeds
@ 3400 rpm
Continuous Torque
Output
Drawbar Rating
Maximum Weight
on Axle
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engi-
neers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and cor-
rected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are
collected without these attachments. Actual gross engine power will be higher than net engine power and is affected by,
among other things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on
which engines are placed, the gas engine may not develop the rated gross power when used in a given piece of power
equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine components (air
cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (tem-
perature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Strat-
ton may substitute an engine of higher rated power for this Series engine.

PARTS AND ACCESSORIES

See an authorized dealer.
26
Kohler®
Courage™
23 @ 3600 rpm
44.2 cu in. (724 cc)
Alternator: 9 amp Reg.
Battery: 12 Volt, 230 CCA
64 oz (1,9 L)
Capacity: 4.0 Gallons (15,1 L)
Tire Size: 16 x 6.5-8
Inflation Pressure: 12-15 psi (0,68-0,82 bar)
Tire Size: 23 x 10.5-12
Inflation Pressure: 6-8 psi (0,41-0,55 bar)
Hydrostatic Tuff Torq K66
10w 30 Premium Engine Oil
2.6 qt (2,5 L)
Forward: 0-5.5 MPH (0-8,9 km/h)
Reverse: 0-3.0 MPH (0-4,8 km/h)
310 ft-lbs (419 Nm)
440 lbs (200 kg)
674 lbs (306 kg)
MOWER:
Width of Cut
Number of Blades
Base Deck Platform
Cutting Height
Cutting Positions
DIMENSIONS:
Overall Length
Overall Width
Height
46" (116,8 cm)
3
Side Discharge
1.5 - 4.0 in. (3,8 - 10,2 cm)
Infinite
75" (191 cm)
56" (142 cm)
47" (119 cm)
www.simplicitymfg.com