Descargar Imprimir esta página

FarmaMed 05424 Instrucciones De Uso página 25

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
1) INSERTING THE BATTERIES
This appliance operates on two replaceable AAA 1.5 V alkaline
batteries (not provided).
• To insert the batteries, open the battery compartment by
pressing down on the lid, which will be released automatically
(Fig. 3).
• Insert the batteries as indicated, then close the battery com-
partment.
• When the battery is exhausted, a message will appear on the
display (Fig. 4).
Fig. 3
Remove the battery
premere con forza
-
compartment
lo "
" della batteria
lid by pressing
per espellerla
Insufficient power caution:
Fig. 4
when battery voltage is lack, LCD shows "
sign and battery mark is always on, which means
you should replace the battery.
e:
imbolo
2) SELECT MEASUREMENT UNIT
• The default setting of this appliance is Celsius degrees.
• The scale of measurement can be switched between Fahren-
heit degrees (°F) and Celsius degrees (°C).
• To change the measurement unit, while the appliance is
switched off, hold down the "MEM" button.
• Change the measurement unit by pressing the "MEM" button
until the display shows the desired unit of measurement.
• Wait for a few seconds for the measurement unit to be memo-
rised. The appliance will switch on automatically.
APPLIANCE PREPARATION
Press a nger down rmly
on the - pole of the battery
to remove it
"
25
23
EN
EN

Publicidad

loading