Battery Replacement - FarmaMed 05424 Instrucciones De Uso

2) MEASUREMENT OF THE TEMPERATURE OF LIQUIDS/
OBJECTS AND THE ENVIRONMENT
• The presence of the protective cap does not in any way af-
fect the measurement of the temperature of liquids, objects
or environments.
• Hold down the "
ment mode.
• When this mode is used, the range of measurement is diffe-
rent to that for body temperature measurements. In this case,
the range is 0 °C - 93.2 °C.
• Direct the thermometer at the object, liquid or environment
to be measured.
• Press the " " button for one second. Once the measurement
has been taken, a short tone will sound and the value measu-
red will appear on the display (Fig. 11).
Fig. 11
The LCD display ashes until the
appliance starts taking
measurement.
Note: If the tone does not sound, the temperature measurement
has not yet been completed. Do not move the thermometer away
from the object, liquid or environment yet. (No tone will be heard
if the sound function has been disabled).
When the display shows the "LO" message and the battery
symbol is fixed, replace the batteries with batteries of the same
type.
1. Open the battery compartment as indicated in figure 3.
2. Remove the exhausted batteries and dispose of them as in-
dicated in the "Disposal" chapter.
3. Insert batteries of the same type and with the same service
life, making sure they are positioned as indicated.
4. Dispose of the exhausted batteries in compliance with appli-
cable local regulations.
5. Close the battery compartment.
30
" button to obtain the object measure-

BATTERY REPLACEMENT

Measurement result.