Four Channel Remote Control Transmitter - Carson marines HM-38 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

c. Four channel remote control transmitter
Included in the scope of delivery is a remote control
transmitter with two remote control levers, which are assigned
the two respective functions.
These functions are activated by the movements forwards /
backwards and right / left.
AA X 8 batteries are required for the
transmitter (not included)
4-CH Transmitter Features:
1. The usage of 2.4 GHz technology, which features automatic
code pairing and ID allocating, is prompter in reaction, more
sensitive in operation, and stronger in anti-interference.
2. 4-channel micro-computer as the encoder;
output power: ≤ 10 mW
current drain:
50 mA
power source: 1.2 V x8 NiMH battery (9.6 V) or
1.5 V x8 AA dry cell battery
3. The DIP switches are available for various servos. It can
perform the flight actions such as ascending, descending,
forward, backward, leftward, rightward and so on.
4. Free to switch between left-hand and right-hand throttles
(Mode 1 and Mode 2).
Controll identification and function:
MODE 1
1. Left stick/ rudder.
It controls your helicopter forward, backward, left, and right.
Push up to fly your helicopter forward, pull down to fly back-
ward, push leftward to fly left, and push rightward to fly right.
2. Right stick/ Throttle.
It controls your helicopter ascending, descending, left
moving and right moving. Push up to ascend your helicopter;
pull down to descend, push leftward to move your helicopter
left, and push rightward to move right.
MODE 2
1. Left stick/ throttIe.
It controls your helicopter ascending, descending, left, and
right. Push up to ascend your helicopter, pull down to
descend, push leftward to fly left, and push rightward to fly
right.
2. RIght stick/ rudder.
It controls your helicopter forward, backward, left moving
and right moving. Push up to fly your helicopter forward, pull
down to fly backward, push leftward to move your helicopter
left, and push rightward to move right.
3. Power Indicator.
The indicator is consisted of three colours: red, yellow, and
green.
Green LED on means the electricity is enough to fly;
Green LED off and yellow LED on indicate the power is not
enough and stop flying;
Yellow LED off and red LED on show the power is in extreme
shortage, and please stop flying at once.
CARSON Helikopter MARINES HM-38 50 050 7025
Put the charged batteries in the battery compartment of the
transmitter.
Pay attention to the correct polarity!
Mode 1
Left stick/
rudder
Elevator trim
Power switch
Rudder trim
Mode 2
Left stick/
throttle
Throttle trim
Power switch
Rudder trim
Fig. 1
Fig. 2
GB
Power
indicator
Hook
Throttle trim
Right stick/
throttle
Aileron trim
Power
indicator
Hook
Elevator trim
Right stick/
rudder
Aileron trim
Antenna
Ornament
cover
Training jack
Charge jack
Cover of the
battery box
Elevator
Aileron
Throttle
Rudder
Not used
11

Publicidad

Tabla de contenido
loading

Tabla de contenido