American Standard Advanced Clean 100 Combo Manual Del Usuario página 55

Troubleshooting
Auto Seat Open and Automatic SpaLet Seat Open/Close (Continued)
Symptom
®
The SpaLet lid or
SpaLet seat does
not automatically
open or close.
The SpaLet lid
stays open.
The SpaLet lid
keeps opening and
closing despite not
being used.
The SpaLet lid
stays open.
The SpaLet seat
opens forcefully and
hits the SpaLet lid.
The operation
sound may be
louder than
models you have
used in the past.
Warm Air Drying
Symptom
Warm Air Does
Not Come Out
Warm Air is Not
Warm
Warm air stops
midway through
the process.
Cause
The SpaLet lid is closed manually.
The room temperature exceeds
30°C/86°F.
The upper body sensor is dirty.
The sensor is exposed to direct
sunlight.
Room Refresh does not function.
This is not a malfunction.
This ensures that the SpaLet seat fully opens so that it will not fall back
down.
When purchasing a replacement model, the operation sound may be
louder due to changes in product design. This is a feature of the product
and is not a malfunction.
Cause
Seat sensor is not triggering.
The warm air drying temperature
is not set to an appropriate
temperature.
Differences in temperature can be felt in accordance with usage
conditions. The air temperature is compliant with International
Electrotechnical Commission (IEC) standards.
This function has been used for
more than 4 minutes.
Solution
The SpaLet seat lid will not open
automatically for 10 seconds after it
has been closed manually.
Performance may suffer if the room
temperature exceeds 30°C/86°F, or the
SpaLet body is exposed to direct sunlight.
Wipe the sensor unit with a soft and
clean cloth.
Do not expose the SpaLet to direct
sunlight.
This is not a malfunction.
If the SpaLet lid is opened during
the configured time, plasmacluster
ions will be released to refresh the
bathroom.
Solution
Sit on the SpaLet.
Set the warm air drying temperature
to an appropriate temperature.
Press the 【DRY】 button again.
Page
ー
ー
26
ー
20
ー
ー
Page
25
9
ー
16
52 - EN