Honeywell HG Serie Manual De Instrucciones página 11

INSTALLATION (CONTINUED)
Window Bracket Kit:
Part A:
Length 19.9" (50.5 cm)
This window kit is designed to fit most standard sliding windows. If your window is outside of the
size parameters as outlined above, the window bracket can be cut shorter to fit by bringing it to a
nearby hardware store.
Note: After setting the window bracket to the size of your window, please remove it from the window
and follow the instructions below.
2. Connect the hose to the rear exhaust outlet on the back of the unit. Slide-in the hose connector
then rotate clockwise until it is locked in place.
+
Part B
Length 19.9" (50.5 cm)
Horizontal Sliding Window
=
Part A + B:
Min. Length 28.9" (73.3cm)
Max. Length 38.2" (97.0 cm)
Vertical Sliding Window
Hose:
Dia.5.9'' (15cm)
Length: 10.23'' to 47'' (26cm to 120cm)
EN 4