Step 7. Configure The Control-Panel Settings; Configuring The Control-Panel Language; Configuring The Date And Time - HP 9200c Guía De Instalación Inicial

Ocultar thumbs Ver también para 9200c:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 7. Configure the control-panel settings

When the device is turned on for the first time, the control-panel display presents prompts for
setting the language, date, and time.

Configuring the control-panel language

By default, the control panel on the product shows messages in English. You can use the
control panel menus to configure the product to show messages in another supported
language. When the product is turned on for the first time, the LANGUAGE menu appears
on the control-panel display. Select a language to continue.
If no language is selected within 60 seconds, English is set as the language, and any
NOTE
language change must be made using the process below.
Follow these instructions to change the control-panel language.
1. Press the
2. Touch CONFIGURE DEVICE (the third menu item).
3. Touch SYSTEM SETUP (the fourth menu item).
4. Scroll down and touch LANGUAGE (the last menu item).
5. Touch the preferred language.

Configuring the date and time

After configuring the language, the control-panel display shows the current date and time. If
the date and time are wrong, touch OK to set them. If they are right, touch Exit. Once it has
been set, the real-time clock within the device will keep the correct time.
ENWW
M
button on the control panel.
ENU
Step 7. Configure the control-panel settings
15

Publicidad

Tabla de contenido
loading

Tabla de contenido