First Use - Braun Oral-B Triumph Professional Care 9900 Manual Del Usuario

English
New Oral-B Triumph now with SmartGuide
uses an interactive wireless display to help you
optimize your brushing experience.
Important
• To avoid electromagnetic interference and/or
compatibility conflicts, deactivate the radio
transmission of your toothbrush before
carrying or using it in restricted surroundings
such as aircrafts or specially marked areas
in hospitals (see «Deactivating the radio
transmission»).
• Persons with pacemakers should always
keep the toothbrush more than six inches
(15 centimeters) from the pacemaker when
turned on. If at any time you suspect
interference is taking place, deactivate the
radio transmission of your toothbrush before
using it (see «Deactivating the radio
transmission»).
Description
a Oral-B ® FlossAction™ brush head
b On/off button
c Mode button
d Handle
e Handle display
f SmartPlug charger (includes charging ring
and SmartPlug)
g Base plate
h Base station
i Protective cover
®
j Oral-B ProWhite™ brush head (not with all
models)
k SmartGuide display unit
l Wall mount
m Adhesive tape

First use

Before brushing for the first time, charge your
toothbrush. Plug the SmartPlug into an electrical
outlet and place the handle (d) on the charging
ring (see «Connecting and charging»).
• To activate the SmartGuide display unit (k),
remove the battery compartment cover on the
back and insert the two batteries (type AA)
with correct polarity (see symbol in the battery
compartment).
h /m in h /m in
s e t s e t
2 2
1 1
• A flashing «12:00» on the SmartGuide display
indicates that time can be adjusted. Press the
«set» button, located in the battery compart-
ment, until «12h» is displayed.
• By briefly pressing the «h/min» button, you
can toggle between a «12h» or «24h» daytime
format. Push the «set» button to confirm your
choice.
h/min h/min
• Then the hour digit starts flashing. Press the
«h/min» button until the right hour appears
and confirm with the «set» button. Proceed
the same way to set both minute digits. If you
prefer not using this clock feature, the flashing
«12:00» will disappear automatically after 24h.
h/min h/min
You can start your toothbrush by pressing the
on/off button (b). To avoid splashing, guide the
brush head to your teeth before switching the
appliance on.
h /m in h /m in
s e t s e t
h/min h/min
5