Testing The Installation - Honeywell Domonial CMI Guía Rápida Para Los Instaladores

Programming
4.4 Saving or Cancelling Modifications
DO OT FORGET TO SAVE YOUR CO FIGURATIO !!
Note that after saving a configuration, if all the panel LEDs light in succession, one or more
parameters has been set with an incorrect value. The installation cannot be completed until
this has been corrected. Please restart programming.

4.5 Testing the Installation

Checking faults on the panel and peripherals:
1-REGISTER
2-DEVICES
3-PARAMETERS
4-DATE & TIME
5-SYSTEM DIAG.
6-TRANSM.STATUS
7-RADIO SCAN
8-ABORT
9-SAVE+QUIT
The panel version is indicated for the default settings, designation/customer, manufacturing reference,
software version, serial number and VAT data structure.
"OTHER" in the Device Status screen notifies you of specific faults on a device, e.g. a dirty chamber in
a smoke sensor.
Checking the network connection status:
1-REGISTER
2-DEVICES
3-PARAMETERS
4-DATE & TIME
5-SYSTEM DIAG.
6-TRANSM.STATUS
7-RADIO SCAN
8-ABORT
9-SAVE+QUIT
PANEL VERSION
--------------------
CUSTOMER ..X.......
Ref tech S/W ver ..
SN: .....................
VAT: 7.56 ..............
QUIT ( )
TRANSM. STATUS
---------------------
GSM KO
GPRS KO
PSTN OK
ETHERNET OK
GSM LEVEL 0
DONE (OK/ )
PANEL STATUS
--------------------
BATTERY KO
TAMPER OK
MAINS KO
QUIT ( )
English
DEVICE STATUS
--------------------
BATTERY OK
TAMPER KO
SUPERV KO
OTHER OK
QUIT ( )
13