Briteq BT-Dazzle Manual De Instrucciones página 10

ENGLISH
Manual Test
Used to test manually the different functions.
 Press the [MENU] button until the display shows [Manual Test].
 Press the [ENTER] button to go in the manual test menu.
 Use [DOWN] and [UP] button to browse the different test options
 Press the [ENTER] button to select the desired option
 Use [DOWN] and [UP] button to set the DMX value of the option
 Press the [ENTER] button to set the DMX value
 Use [DOWN] and [UP] button to browse the other test options or press the [MENU] button to leave the
manual test mode
Auto Test
Used to activate the internal "self-test" program which checks all possibilities of the unit.
 Press the [MENU] button until the display shows [Auto Test].
 Press the [ENTER] button to start the internal self-test program.
 To go back to the functions press the [MENU] button.
Fixture Time
Used to show the number of working hours of the unit.
 Press the [MENU] button until the display shows [Fixture Time].
 Press the [ENTER] button to show the number of working hours in the display.
 To go back to the functions press the [MENU] button.
Firmware version
Used to show the software version that is installed in the unit
 Press the [MENU] button until the display shows [Firmware Version].
 Press the [ENTER] button to show the software version on the display.
 To go back to the functions press the [MENU] button.
Defaults
Used to choose between 2 sets of default settings, often used by rental companies:
PRO-defaults: basic settings for use on professional DMX-controllers.
AUTO-defaults: basic settings for easy master/slave use.
 Press the MENU button until the display shows "Defaults".
 Press the ENTER: to avoid accidental loss of your settings, the display shows "Confirm?":
 Use DOWN and UP buttons to select "Yes" or "No" and confirm by pressing the ENTER button.
 When you select "Yes", you have the choice between 2 options, each with their own settings:
Settings
Channel mode
Show mode
Dimmer Curve
Slave Mode
Blackout Mode
Sound State
Sound Sense
Pan Inverse
Tilt Inverse
Backlight
Function Delay
Dimmer Speed
Starting from these defaults you can easily make your additional settings. The other setup parameters
remain unchanged.
 Press the [MENU] button for about 2 seconds to store the setting and to return to running mode.
BRITEQ
®
PRO def AUTO def
16ch 3MSL
Show 1 Show 1
Linear Linear
Slave 1 Slave 1
Yes No
On On
90 90
Normal Normal
Normal Normal
Off On
3s 3s
Smooth Smooth
8/80
OPERATION MANUAL
BT-DAZZLE