TEXA eLight ONE Manual Tecnico página 84

Make sure the device's power plug can always be accessed so
that it is possible to disconnect it from the mains at any time.
Proceed as follows:
1. Insert the appropriate plug into the connector until the locking mechanism clicks
into place.
2. Connect the charger's jack to the connector located on the side of the device.
3. Connect the charger to a power socket.
4. Wait approximately 3 hours for the internal battery to be fully charged.
The battery is fully charged in approximately 3 hours and ensures an autonomy
of 7 - 8 hours approx.
en
83