TaoTronics TT-BA09 Manual Del Usuario página 6

Note:
•
You can use the adapter while it is charging.
•
We recommend charging the unit for at least 2 hours before
using it for the rst time.
Pairing
Pair in TX mode:
1. Set the TT-BA09 to TX mode and connect it to your
non-Bluetooth audio transmitting device.
®
2. Place your Bluetooth audio receiving device, like earphones
®
or speakers, within a 3 feet / 1 meter range and set it to
pairing mode.
3. Turn on the TT-BA09 and tap the power button twice to enter
pairing mode. After approximately 10 seconds, pairing will be
complete.
Pair in RX mode:
1. Set the TT-BA09 to RX mode and connect it to your
non-Bluetooth audio receiving device.
®
2. Turn on the TT-BA09 and tap the power button twice to enter
pairing mode.
3. Activate the Bluetooth
function on your transmitting device –
®
phone / tablet, and search for the nearby Bluetooth
•
For iOS: Settings > Bluetooth
•
For Android: Settings > Bluetooth
4. Find "TaoTronics TT-BA09" in the search results and tap on it to
connect. Once connected, the LED indicator will turn solid blue.
Note:
•
The adapter will enter pairing mode automatically when
powered on for the rst time.
•
The original pairing memory will be cleared after a mode switch.
It will automatically start pairing each time it's powered on.
•
If a PIN code is required for pairing, try 0000 (four zeroes), 8888
(four eights), 1111 (four ones), or 1234.
•
The adapter can remember previously paired devices and will
attempt to pair with devices automatically, without going into
pairing mode.
Pair with two devices at the same time
In TX mode:
In TX mode, the adapter is able to pair with two Bluetooth
earphones/speakers at the same time.
devices:
®
> On
®
> On > Scan for devices
®
stereo
®
07/08