Troubleshooting Guide; Ordering Replacement Parts - Ninja CE200 Serie Manual Del Propietário

Ocultar thumbs Ver también para CE200 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING GUIDE

There is sediment in my coffee.
If there is sediment at the bottom of the brewed coffee, this may be due to using finely
ground coffee in the permanent filter.
To reduce the amount of sediment in the brewed coffee, use a slightly coarser grind
or use a paper filter.
There are grounds in my coffee.
Either the permanent filter or a paper filter must be in place when brewing.
Using too many grounds can cause the filter holder to overflow. Once cooled,
clean out the filter holder and refill using the appropriate amount of coffee
(1 scoop per cup).
Finely ground coffee can clog the filter holder. For best brewing results, use
a medium-grind coffee.
Brew basket drips even after the brew cycle is completed.
The removable filter holder valve may be clogged. Rinse the filter holder with
tap water and press the valve repeatedly until the clog is cleared.
Paper filter is folding over.
The unit is designed to take a #4 cone filter. Be sure you are using this size and shape, as
larger sizes may fold over. Allow the filter holder to cool before handling. Be sure the paper
filter is folded along its two seams and is pressed firmly into the filter holder. Alternatively,
you can wet the sides of the paper filter to temporarily adhere it to the
filter holder.
If the problem persists, try using the permanent filter instead of a paper filter.
NOTE: When using a paper filter, DO NOT use the permanent filter.
What impacts coffee brew volume?
When you make hot coffee, the coffee grounds will absorb some of the water that is
brewed, resulting in slightly less brewed coffee than amount of water used. The more
coffee you use, the more water will be absorbed.
Coffee is weak
For a stronger coffee, use the Rich Brew setting, try darker-roast grounds, or use the
permanent filter rather than a paper filter. If you want an even bolder flavor, you can
add more coffee grounds. Additional grounds do absorb water, so you may get more
concentrated coffee but overall less liquid volume.
Coffee is strong
For milder coffee, try the Classic Brew setting using light-roast grounds and a paper filter
rather than the permanent filter. If you want an even milder flavor, you can put fewer
grounds in the filter holder.
11
Brew will not start.
NOTE: The brew will begin, pause, and then continue. This process is used to evenly
saturate the coffee grounds.
Ensure the unit is powered on and the display is illuminated. If there are no lights, the
machine is not getting power. Try a different outlet and press the Power button.
Check to make sure there is water in the water reservoir.
Make sure the carafe is in place. The brewer will not dispense coffee if the carafe is not in
place. If it is not in place, the brew will remain in the brew basket, which could lead
to overflow.
If the brew still does not start, it may be time to run a clean cycle. Please refer to the
Descaling Your Ninja® Coffee Brewer section.
Brew cycle is too slow.
A full carafe brew will take approximately 12–15 minutes. If a full carafe brew takes longer
than expected, you may need to descale your unit.
Carafe overflowed.
The carafe may not have been empty prior to brewing, or the water level exceeded the
Max Fill line on the water reservoir prior to brewing. Reminder, do not add additional water
to the reservoir after a brew or cleaning cycle has already started.
For Classic brew, the carafe holds 60 fl. oz. To avoid overflows, make sure carafe is empty
prior to brewing and the water reservoir is not filled past the 12-Cup Line.
Brew basket overflowed.
Check that the carafe is in place with the lid secured. If the carafe is in place, the bottom
of the filter holder may be clogged. This can happen with finely ground coffee
or too many coffee grounds in the filter holder. Wash brew basket pieces per the
Care & Maintenance instructions
Medium-grind coffee is recommended.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, visit our website: ninjaaccessories.com
or contact Customer Service: 1-877-646-5288.
ninjakitchen.com
12

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido