G
IMPORTANT
• Never use the device with a damaged
power cord, plug, cabinet or control
panel. Never trap the power cord or
allow it to come into contact with
sharp edges.
• The installation must be completely
in accordance with local regulations,
ordinances and standards.
• The device is suitable exclusively for
use in dry places, indoors.
• Check the mains voltage. This device is
suitable exclusively for earthed sockets –
connection voltage 220-240 Volt/ 50 Hz.
• The device MUST always have
an earthed connection. You may
absolutely not connect the device if
the power supply is not earthed.
• The plug must always be easily
accessible when the device is
connected.
• Read these instructions carefully and
follow the directions.
Before connecting the device, check that:
• The connection voltage corresponds to that
on the type plate.
• The socket and power supply are suitable
for the device.
• The plug on the cable fits the socket.
• The device is on a stable and flat surface.
Have the electrical installation checked by
a recognised expert if you are not sure that
everything is in order.
GB
81