Publicidad
Idiomas disponibles
Idiomas disponibles
Cold Storage
(1) Press the [mode]key to select the cold storage function
(2) Press the [+] or [-] key to set the cold storage temperature. The lower
the setting temperature is, the greater the storage capacity is. Set the
temperature range between - 6ºC and 5ºC
(3) After the completion of cold storage, it will automatically enter the standby
insulation state.
Note: a. During cold storage, the wind is at high speed and the swing blade
is at the maximum outlet angle. At this time, the heat energy will be
discharged. In a narrow space, please open the doors and windows for
ventilation.
b. The actual temperature of water in the water tank is displayed during
cold storage.
c. The air inlet and air outlet shall not be covered.
Heat Storage
(1) Press the [mode]key to select the heat storage function
(2) Press[+]or[-]key to set heat storage temperature, between 20ºC and 30ºC.
After heat storage completes, the unit enters in standby and temperature-
holding status.
Note: a. During the heat is storage, the air outlet fan is closed, and there is no air
volume to blow out at this time.
b. The actual temperature of the water in the tank is displayed during heat
storage.
Heating
(1) Press the [mode] key to select the heating function
(2) Press the [+] or [-] key to set the heating temperature, and select the
temperature range between 16ºC and 32ºC.
(3) Press the [wind speed] key to select low wind, mid wind, high wind and
automatic wind speed in 4 levels.
(4) Press the [swing wind] key to select the upper and lower swing blades to
swing or stop.
Note: a. The actual temperature of the water in the tank is displayed during
heating.
b. The air inlet and air outlet shall not be covered.
Ventilation
(1) Press the [mode] key to select the ventilation function
(2) Press the [wind speed]key to select low wind, mid wind, high wind and
automatic wind speed in 3 levels.
(3) Press the [swing wind] key to select the upper and lower swing blades to
swing or stop.
Note: During ventilation, it displays actual air inlet temperature.
GB
93
Publicidad
