NIPRO Diagnostics TRUEread Libreta Del Propietario página 26

6. Lance fingertip or forearm. Allow drop to
form.
7. With Strip still in Meter, touch
edge of Sample Tip to blood
drop and hold. Allow blood to
be drawn into Strip until Meter
beeps.
Note: If Meter did not beep or begin countdown
after touching blood drop to Sample Tip,
discard Test Strip. Repeat test with new Test
Strip and new blood drop. If problem
persists, see Troubleshooting.
8. After countdown, result is displayed
with date and time. Remove Test
Strip and discard. Result is stored in
Memory. Meter turns off.
9. Record result in log book.
Note: Used Strips and lancets are considered
biohazardous. Dispose used Strips and
lancets in approved biohazard container.
24