Leister MINIFLOOR Instrucciones De Funcionamiento página 8

Operating readiness
F. Insert the unwinding device (11) into
the hole (10) and fasten it in place with
the clamping screw (12).
G. Alternatively, without the unwinding de-
vice, guide the welding rod through the
lug (17).
H. Inspect the position of the adjusting
screw for the starting switch (20).
Meaning:
• Reduce start delay (−)
• Delay start (+)
Default setting ex works:
The middle groove of the setting washer
for the starting switch (20) is aligned
to the bottom edge of the guide arm (4).
18
12
10
11
17
4
20