Tabla de contenido
Publicidad
5
6
7
:
8
9
C
D
E
F
G
1
1
3
4
2
B
A
I
H
J
PRINCIPAL PARTS
1 BOBBIN WINDER (Page 21)
Winds the thread onto the bobbin to be used for the lower thread.
2 STITCH LENGTH DIAL (Page 12, 16)
Controls the length of the stitches.
3 SPOOL PIN AND SPOOL CAP (Page 21, 25)
4 STITCH WIDTH DIAL (Page 17)
Controls the stitch width.
5 UPPER TENSION CONTROL DIAL (Page 32)
Controls the tension of the upper thread.
6 BUTTONHOLE LEVER (Page 47)
7 NEEDLE THREADER (Page 27)
8 FLAT BED ATTACHMENT WITH ACCESSORY COMPART-
MENT (Page 11, 18)
9 ZIGZAG PRESSER FOOT (Page 3, 11)
: REVERSE SEWING LEVER (Page 17)
Push for stitching in the reverse direction.
A FEED DOG POSITION SWITCH (Page 18)
B PATTERN INDICATION WINDOW (Page 12)
Shows the stitch number selected.
C HOLE FOR VERTICAL SPOOL PIN (Page 31)
Used to hold a second spool of thread for twin needle sewing.
D HANDWHEEL
E PATTERN SELECTION DIAL (Page 12)
Turn in either direction to select the desired stitch.
F MAIN POWER/SEWING LIGHT SWITCH (Page 7)
Turn ON/OFF the main power/sewing light switch.
G FOOT CONTROLLER JACK (Page 5)
Insert the foot controller plug for operation and connect the
machine to the power supply.
H BUTTONHOLE FINE ADJUSTMENT SCREW (Page 51)
I PRESSER FOOT LEVER (Page 25)
J FOOT CONTROLLER (Page 8)
Used to control sewing speed/start and stop.
Publicidad
Tabla de contenido
