You will hear a confirmation when the test is complete.
When you see the main screen (left) the system is ready.
Now the +Alarm can be positioned (desktop or wall).
Led GSM[
]
RED Keep ON: SIM Card – Failed.
RED Keep Flashing: GSM Signal – Failed.
BLUE Keep ON: SIM Card & GSM Signal – OK (Signal Bars: Indicate the GSM signal
strength).
Current Color Blinking: Sending RF signal.
Led Status[
]
BLUE Breathing: DISARM.
PURPLE Breathing: HOME ARM.
RED Breathing: ARM.
Led GSM and Status[
PURPLE Keep Flashing: System is warming up.
Current Color Slowly Flashing: Main Panel Low Battery.
RED & BLUE Alternately
Flashing: SOS Alarm.
+
]
+Alarm uses MicroUSB as the power cable interface. You
can easily recharge it via any MicroUSB cable.
54
ENG