Publicidad
Idiomas disponibles
Idiomas disponibles
LIST OF COMPONENTS
Frame
fig. 1
T1
T2
T3
Armrest cover
T4
Big handrail (facing the street)
T5
Handrail covering
T6
Feeding bottle holding unit
T7
Stabilizing supports
T8
Storage basket
T9
Rain cover
Transport Seat
fig. 2
R1
Small handrail (facing mum)
R2
Transport seat hood
Carrycot/Car seat
fig. 3
C
C1
C2
S
FRAME
ASSEMBLY/REMOVAL OF REAR WHEEL ASSEMBLY
fig. 4
fig. 5 Hook the ring (T10) on the bracket (T11); then, press
the lever (T12) until its complete hooking, making sure that
the ring (T10
CAUTION: make sure that the wheels are properly hoo-
ked before use.
fig. 6
(T12) and unhook the ring (T10) from the bracket (T11), until
ASSEMBLING THE FRONT WHEEL ASSEMBLY
fig. 7
both CLICKs signaling the correct hooking.
CAUTION: make sure that the wheels are properly hoo-
ked before use.
fig. 8
(T13
FRAME OPENING
fig. 9 Keeping pressed the lever (T14) positioned on the
fig. 10
control (T15) till the horizontal blocking position.
fig. 11 Make sure that all closing mechanisms are pro-
perly attached on both sides before use.
FRAME CLOSING
fig. 12
(T17).
fig. 13
fig. 14 Make sure that the lever (T18) is attached to the cen-
tral articulated joint.
TRANSPORTATION HANDLE
fig. 15 To transport the closed frame, use the proper handle
(T19
INSTRUCTIONS
HANDLE ADJUSTMENT (FOR MODELS, WHERE IT IS
FORESEEN)
fig. 16 The Frame is equipped with adjustable handles in
terms of height and direction; to adjust the handle to the
wished position, act on the internal push-buttons (T20).
REAR WHEELS BRAKE
fig. 17 To engage the brake, push downwards the lever
(T21
Always engage the brake during stops.
FRONT WHEELS BLOCKING/RELEASE
fig. 18 The Frame is equipped with pivoting wheels that can
positioned on the front wheels.
REAR PLATFORM
fig. 19 Act with the foot on the rear platform to ease the
crossing of obstacles.
FEEDING BOTTLE HOLDING UNIT
fig. 20 Hook the feeding bottle holding unit (T6) to the
STORAGE BASKET
fig. 21 The frame is equipped with a capacious storage
basket (T8). To secure it, insert all buttonholes in the proper
hooks and button up the rear strips.
ADDITIONAL TRANSPORT UNITS TO THE FRAME
(CARRYCOT, TRANSPORT SEAT, AND CAR SEAT)
fig. 22
ZIPPY CARRYCOT
HOOKING OF THE CARRYCOT TO THE FRAME
follows:
fig. 23 Remove the armrest covers (T3
T1) until hearing
sing with the index finger the hooking lever (T23) positioned
inside the armrest (T24).
fig. 24 Insert the two stabilizing supports (T7) in the ope-
nings (T25).
CAUTION: the stabilizing supports have to be inserted
only when using the frame with the carrycot.
fig. 25
armrests (T24
fig. 26 CAUTION: make sure that the carrycot is always
properly attached on both sides of the frame before use.
UNHOOKING OF THE CARRYCOT FROM THE FRAME
fig. 27 Act on the lever (C3
fig. 28
handle.
T16), lift the handle
HOOKING OF THE HOOD
-
fig. 29
fig. 30 Wrap the hood (C2) around the handle fastening it
using the suitable press studs.
HANDLE AND HOOD ADJUSTMENT
fig. 31 To adjust the handle and the hood act on the two la-
teral button (C4
T17).
fig. 32 CAUTION: to transport the carrycot, always hold it
by the handle.
T22)
-
-
-
37
Publicidad
