Product Information; Description; Related Documents; Models - Franklin Electric FVJ05CI Manual De Instalación Y Operación

PRODUCT INFORMATION

Description

This constant pressure system consists of an SWC Inline Control attached to one of two different surface
pumps (VersaJet model shown). The control activates the pump as water is used. Once the water flow stops,
the control turns off the pump. This protects the pump in case of a water shortage or dry run event. This
product uses 115 volts via a plug-in cord for power.
The VersaJet pump is designed to work in well conditions that have a
suction lift of 25' or less. The MH pump is intended provide a water
pressure boost over what is being supplied through a pressurized
main, but is also capable of operation where a suction lift of up to 10' is
needed.
Features
Configuration
• Pump needed for shallow well or water main pressure boosting
application
• Simple set up with no programming or adjustment necessary on
the equipment
• No additional pressurized bladder tank is needed in the installa-
tion.
Inline Control
• Flow based pump activation
• Run Dry protection
• System maintains water pressure in the plumbing for immediate
use, and includes a low pressure sensor to activate the unit if a
low pressure event occurs
• Automatic system reset/restart after a power loss or an out of water event.
Operation
• Control has LED indicators for system status and troubleshooting
• Manual reset required after a 24 hour Automatic Reset period
• Manual Reset pushbutton can be used to start the pump at any time.

Related Documents

Visit www.franklinwater.com/products to download.
VersaJet Owner's Manual: 106537101
MH Series Pump Owner's Manual: 106592101
SWC Inline Control Owner's Manual: 998075003

Models

Model No. Description
FVJ05CI VersaJet Series
FVJ07CI VersaJet Series
15FMH05S2 MH Series
15FMH07S3 MH Series
FIL-SWC16 Inline SWC
HP Order No.
0.5 91180105
0.75 91180107
0.5 96061505
0.75 96061506
Up to 2 HP 91987103
Weight
31
34
22
25
N/A
PRODUCT INFORMATION
Description
3