Front View; Operation Method; Battery Installation - Mach Power HC-FTPOY2 Guía De Uso

Product Introduction & Operation Guide
1.1

Front View

SpO2 value
Button
Power indicator
1.2

Operation Method

A. Open the battery cover, and put the two AAA batteries into
the battery compartment in correct polarities, then replace
the cover;
B. Press the bottom of the equipment and open the probe, then
insert one finger into the probe;
C. Press the button to turn the equipment on, and the measure
interface will appear;
D. After about 8 seconds, the measurement result can be read
directly from the display screen;
E. Before reading the parameters, make sure that stable
numbers of the pulse oximeter interface has sustained more
than 4 second;
F. The equipment will turned off automatically within 8 seconds
when the finger left the probe.
1.3

Battery Installation

A. Put the two AAA batteries into battery compartment in
correct polarities.
B. Push the battery cover horizontally along the arrow shown
as right.
Pulse rate value
Pulse bar graph
Perfusion index
ENG