Cleaning & Maintenance - Maximatic EPM-400 Manual De Instrucciones

CLEANING & MAINTENANCE
TIP: It is strongly recommended to clean the kettle after EVERY use to avoid
burning of excess oils on the bottom of the kettle and to prevent hard to
clean oil build up.
1. Allow unit to cool down
completely before cleaning.
2. Always make sure unit is
unplugged from outlet.
3. Use a hot damp towel to
clean the kettle surface inside
and out.

WARNING: NEVER immerse
popping kettle into water or
any other liquids.
4. With a clean damp cloth, wipe
down the glass, acrylic
doors and metal surfaces.
ADDITIONAL CLEANING TIPS
TO CLEAN POPPING KETTLE:
NOTE: To thoroughly clean the kettle, first make sure the unit is „OFF‟ and
completely cool..
1. Add 1-1/2 to 2 cups of hot
water (no detergent is
necessary) into the kettle.
2. Turn the stirrer switch and
the heater switches „ON‟ and
and bring water to boil for 2
to 3 minutes.
3. Place a towel in the bottom
of the unit with a
large bowl on top.
5. Do NOT use any acidic, citrus
based cleaners or abrasive
cleaners on the acrylic doors
as it may scratch or become
dull.
6. Frequently empty the kernel
tray, wash with soap and
warm water and dry
thoroughly.

DO NOT WASH ANY PARTS
IN DISHWASHER.

NOTE: make sure bowl is
large enough to pour out the
water from the kettle.
4. Turn off stirrer and heater
switches and carefully pour
out water into bowl.

CAUTION: Kettle and water
will be HOT!
5. Repeat same procedure 2 to
3 times for best results.

CAUTION: Never immerse the
kettle into water.
8