D-Link DAP-1320 Guia De Instalacion página 31

Ocultar thumbs Ver también para DAP-1320:

Idiomas disponibles

TROUBLESHOOTING

SETUP AND CONFIGURATION PROBLEMS

1. HOW DO I RESET MY DAP-1320 WIRELESS RANGE EXTENDER N300 TO FACTORY

DEFAULT SETTINGS?

- Ensure the product is powered on.

- Press and hold the reset button on the bottom of the device for 5 seconds.

Note: Resetting the product to the factory default will erase the current configuration

settings. The default Wi-Fi network name (SSID) and password are printed on

the D-Link DAP-1320 Wireless Range Extender N300's Wi-Fi Configuration

Card.

2. HOW DO I ADD A NEW WI-FI CLIENT OR PC IF I HAVE FORGOTTEN MY WI-FI NETWORK

NAME (SSID) OR WI-FI PASSWORD?

-If you haven't changed the extended Wi-Fi network's settings, you can use the

network name (SSID) and Wi-Fi password on the Wi-Fi Configuration Card.

- If you did change the network name (SSID) or Wi-Fi password and you did not record

this information on the Wi-Fi Configuration Card or somewhere else, you must reset

the device as described in Question 1 above.

- Make sure you write down these settings so that you can enter them into each

wirelessly connected PC. You can use the included Wi-Fi Configuration Card to

record this important information for future use.

TECHNISCHE ONDERSTEUNING

Technische ondereuning voor klanten in Nederland:

http://dlink.com / 0107994344 / €0.15per minuut.

Technische ondereuning voor klanten in België:

http://dlink.com / 033039971 / €0.175per minuut(spitsuren), €0.0875per minuut(daluren)

Technische ondereuning voor klanten in Luxemburg:

http://dlink.com / +32 70 66 06 40

DAP-1320

Tabla de Contenido