Pc Setup - Kreisen KR-321T Manual Del Usuario

PC Setup

You can adjust horizontal/vertical position, clock, phase, and
auto-configure, reset as you prefer.
Press the MENU button and then
the SPECIAL menu.
G G
Press the button and then D D
/
desired picture item.
Press the F F / G G button to make appropriate adjustments.
H-Position / V-Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes vis-
ible on the screen background. And the horizontal screen
size will also change.
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
WXGA (or VGA (Only RGB[DVI] mode))
- When the set is inputted DVI-480p signal in VGA mode, select 480p on the special menu.
- When the set is inputted WXGA signal, select select the desired WXGA resolution.
SPECIAL SPECIAL
Language
CSM
PC Control
WXGA
VGA
Set ID
Caption
Caption/Text
()OO}{OOOKOOMENU
Auto-configure
This function is for the automatic adjustment of the screen
position, clock and phase. The displayed image will disappear
button to select for a few seconds while the Auto-configuration is in progress.
D D / E E
E E button to select the Reset
This function allows you to return to the good picture repro-
duction programmed at the factory and cannot be
changed.
Note : Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor's position, clock and phase manually.
Press the OK button to store it for the PC monitor picture.
Press the EXIT button to return to PC mode.
Language
H-Pos. 0
CSM
V-Pos. 0
PC Control
PC Control
Clock 10
WXGA
Phase 15
VGA
Auto
Set ID
Reset
Caption
Caption/Text
()OO}{OOOKOOMENU
SPECIAL
Language
CSM
PC Control
WXGA 1024X768
WXGA
VGA 1280X768
Set ID
1360X768
Caption
1366X768
Caption/Text
()OO}{OOOKOOMENU
EN
29