Kreisen KR-321T Manual Del Usuario página 40

RGB Mode / DVI Mode
MODE
SVGA
SXGA
WXGA
SXGA
(Synchronization input form : separate)
40
Horizontal
Resolution
Frequency (KHz)
31.469
720X400
DOS
37.927
31.500
37.500
640X480
VGA
37.861
37.500
43.269
35.156
37.879
800X600
48.077
46.875
53.674
48.363
56.476
1024X768
XGA
60.023
68.677
1152X864
54.348
47.700
1280X768
60.150
1360X768 49.020
1366X768 49.020
1280X1024
63.981
MAC 832X624 49.725
Vertical
Frequency (Hz)
70.08
85.03
60.00
67.00 Note:
a. If the set is cold, there may be a small "flicker" when the set is
72.80
switched on. This is normal, there is nothing wrong with the
75.00
set.
85.00
b. If possible, use the VESA 1,024x768@60Hz video mode
56.25
to obtain the best image quality for your LCD monitor. If
60.31
used to PC vertical frequency 85Hz, some noise can be
72.18
seen when PIP is on. In this case, set the PC vertical fre-
quency to 60Hz. The set has been pre-adjusted to the
75.00
mode VESA 1,024x768@60Hz.
85.06
c. Some dot defects may appear on the screen, like Red,
60.00
Green or Blue spots. However, this will have no impact
70.06
or effect on the monitor performance.
75.02
d. Do not press the LCD screen with your finger for a long
84.99
time as this may produce some temporary distortion
60.05 effects on the screen.
e. When the PC screen appears on the set, a message may
60.00
appear on the screen, and the message will differ accord-
75.00
ing to the Window system version (Win98, 2000). If a mes-
60.00
sage appears click "Next" until the message finishes.
60.00
f. If the message "
60.02
adjust the PC as in the 'Displayable Monitor Specification'
74.55
section.
Out Of Range " appears on the screen,