GRABBER GR871 Manual De Instrucciones página 11

Sierra trozadora con abrazadera de cambio rápido (quick-change) de 355 mm (14 pulg.) para trabajo pesado
Ocultar thumbs Ver también para GR871:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION: When cleaning, use only mild soap and a damp cloth
on plastic parts. Many household cleaners contain chemicals which
could seriously damage plastic. Also, do not use gasoline, turpen-
tine, lacquer or paint thinner, dry cleaning fluids or similar products
which may seriously damage plastic parts. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered by
GRABBER, have not been tested with this product, use of such
accessories with this tool could be hazardous. To reduce the risk of
injury, only GRABBER, recommended accessories should be used
with this product.
Use only high-strength Type 1 organic bonded wheels rated 4100 rpm
or higher.
Recommended accessories for use with your tool are available at extra
cost from your local service center. If you need any assistance in locat-
ing any accessory, please contact GRABBER Construction Products,
205 Mason Circle, Concord, CA 94520 or call 1-800-477-TURN
(1-800-477-8876).
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service cen-
ters or other qualified service organizations, always using identical
replacement parts. ALWAYS WEAR SAFETY GLASSES. ALWAYS
SECURE WORK IN VISE. DISCONNECT TOOL FROM POWER
SUPPLY BEFORE CHANGING WHEEL.
Lubrication
Closed-type, grease-sealed ball bearings are used throughout. These
bearings have sufficient lubrication packed in them at the factory to
last the life of the chop saw.
Gears should be relubricated every 60 to 90 days, depending upon use.
This lubrication should only be attempted by experienced power tool
repair persons like the mechanics at GRABBER service centers. The
gear case should be wiped clean and 1/2 oz. (16 grams) of GRABBER
Lubricant Part No. 790206 (6 oz. tube) placed in the gear case.
Full Warranty
GRABBER heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-477-TURN (1-800-477-8876). This warranty does not apply to
accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights and
you may have other rights which vary in certain states or provinces.
9

Publicidad

Tabla de contenido
loading

Productos relacionados para GRABBER GR871

Tabla de contenido