Phoenix Contact ELR H3-IES-SC-24DC/500AC-0,6 Manual Del Usaurio página 20

6. Technical data
Reply output
Contact type
Contact material
Max. switching voltage
Min. switching voltage
Max. continuous load current I
Min. switching current
Max. interrupting rating, Ohmic load
Measurement techn. (in ref. to the trigger characteristic, 8.1. )
Current measurement
Area
Symmetry monitoring
Amount I > I => (I
max nom
Amount I < I => (I
max nom
Response time
Blocking protection
I(L1) or I(L3)
Response time
Trigger characteristic (see diagram 8.1.) as per IEC 60947 -
Cooling time
Operating elements
Operating voltage display
Device and process error display
Activation display
Button
Potentiometer for nominal motor current setting
General data
Power dissipation
Max. switching frequency (pulse/pause times 50:50) 2 Hz
Ambient temperature range
Service life
Degree of protection
20
when used as Signal contact
o
24 V DC
48 V DC
60 V DC
110 V DC
220 V DC
250 V AC
- I / I )
max min max
- I / I )
max min nom
Forward running LED ON (yellow)
min./max. 0.88 W/2.5 W
Operation
Transport, storage
Single contact, 1 PDT
Ag alloy, hard gold-plated
30 V AC / 36 V DC
100 mV
50 mA
1 mA
1.2 W
-
-
-
-
-
ELR...-0.6 ELR...-2
0.075...0.6 A 0.18...2.4 A
≥ 33 % / ≥ 67 % ≥ 33 % / ≥ 67 % ≥ 33 % / ≥ 67 %
≥ 33 % / ≥ 67 % ≥ 33 % / ≥ 67 % ≥ 33 % / ≥ 67 %
2 min. / 1.8 s 2 min. / 1.8 s
- -
- -
-
- -
LED PWR (green)
LED ERR (red)
Error acknowledgment
240°
ELR...-0.6 ELR...-2
0.88 W/4.1 W
-25°C to +70°C
-40°C to +80°C
7
3 x 10 cycles
IP20
Power contact
250 AC/DC
12 V AC/DC
6 A
10 mA
140 W
20 W
18 W
23 W
40 W
1500 VA
ELR...-9
1.5...9.0 A
2 min. / 1.8 s
> 45 A
2 s
Class 10A
20 min.
ELR...-9
0.88 W/7 W