Who Classification - Sanitas SBM 19 Instrucciones Para El Uso

the ‚START/STOP' button.
• ‚EE' appears if it has not been possible to perform the
measurement properly. Observe the section in these in-
structions on error messages/troubleshooting and repeat
the measurement.
• The test result is saved automatically.
• To switch off and release the pressure, press the ‚START/
STOP' button again. If you forget to switch off the device,
it switches off automatically after approx. 1 minute.
Wait at least 5 minutes before taking another measure-
ment!
Evaluating results
Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia
disorders during measurement and if necessary indicates
the measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a
condition where the heart rhythm is abnormal as a result
of defects in the bioelectrical system controlling the heart
beat. The symptoms (omitted or premature heart beats,
slow or excessively fast heart rate) may be caused, among
other things, by heart disease, age, physical predisposi-
tion, excessive use of stimulants, stress or lack of sleep.
Arrhythmia can only be ascertained through examination by
your doctor.
Repeat the measurement if the flashing icon
yed after the measurement. Please note that you should rest
for 5 minutes between measurements and not talk or move
during the measurement. If the icon
please contact your doctor. Any self-diagnosis and treat-
ment based on the test results may be dangerous. It is vital
to follow your doctor's instructions.

WHO classification:

According to WHO Guidelines/Definitions and the latest
findings, the test results can be classified and evaluated
according to the following chart:
.
is displa-
appears often,
14