Protection Against Overheating; Storage; Troubleshooting; Causes Of Malfunction And Fault Rectification - Silvercrest SLE 265 B3 Instrucciones De Uso

Protection against overheating

The appliance has an overheating protection. It switches off automatically if
there is a risk of overheating and switches back on once the appliance has fully
cooled down. The appliance cannot be used during the cool-down phase.
♦ Check whether external factors may have triggered the overheating protec-
tion (e.g. temperatures over 35°C or a closed valve

Storage

♦ Remove the plug from the mains power socket.
♦ Wrap the mains cable
mains plug to the power cable using the safety clip
cable
♦ Empty the water tank
period.
♦ Always store the appliance in an upright position and in a dry and dust-free
environment.

Troubleshooting

This section contains important information on fault identification and rectification.
Causes of malfunction and fault rectification
The following table will help you to identify and rectify minor malfunctions:
Fault Possible cause
The plug is not plugged in.
The mains power socket is not
The appliance
supplying power.
will not switch
Safety stop due to missing or in-
on.
correctly inserted water tank
The water tank
The automatic defrosting func-
The appliance
tion is activated.
stops occasion-
ally (the fan
The humidity of the room has
switches off).
reached the desired level.
■ 46
GB│IE
│
10
around the cable retainer
10
.
4
if you are not using the appliance for a prolonged
4
is full.
11
Remedy
Insert the plug into the mains power
socket.
Check the house fuses.
Insert the water tank
4
.
Empty the water tank
it.
This is a normal feature of the appli-
ance.
This is a normal feature of the appli-
ance.
2
on the air outlet).
9
and secure the
provided with the
4
correctly.
4
and re-insert
SLE 265 B3