Replacement Parts; Warranty Policy - ESAB MT-300GL Instrucciones De Operación

SECTION 5
5.0

Replacement Parts

5.1 General
Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on
the unit nameplate.
5.2 Ordering
To ensure proper operation, it is recommended that only genuine ESAB parts and products be used with this
equipment. The use of non-ESAB parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering replacement parts.
Refer to the Communications Guide located on the back page of this manual for a list of customer service phone
numbers.
Bill of material items that have blank part numbers are provided for customer information only.

WARRANTY POLICY

The ESAB "Cool Grip" Gasless Fluxcored Gun and parts are warranted to be free of defects in material and/or
workmanship for 90 days. If, within that period, any ESAB Gun part is found to be defective under normal
and recommended use, ESAB will, at their option, repair, replace or issue credit for the value of the defective
unit. Claims against this warranty must be submitted through a Factory Authorized Distributor. All parts
and/or equipment returned to ESAB must have a Return Authorization Number obtained by calling (843)
664-4416.
For technical support and special applications, please call ESAB Technical Services Department at (843) 664-
4416. Our trained technicians are available between 8:00 AM and 5:00 PM EST and will answer your application
or repair questions. ESAB employees build Welding Systems for the world's welding professionals. We are
always striving to improve our products and services, and we would appreciate receiving your suggestions
and comments. Please contact us immediately if you experience any safety or operating problems.
Hardware items should be available through local sources.
Note
25
REPLACEMENT PARTS