United Technologies Interlogix ATS1741 Hoja De Instalación página 2

ATS 1741 Modem
TX RX
RX TX
RTS CTS
CTS RTS
GND GND
Links
•
Term: Refer to the control panel installation guide.
•
Earth: Item 1 in Figure.
Specifications
Operating voltage
Operating current
Operating temperature
Relative humidity
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
UTC Fire & Security Americas Corporation, Inc.
3211 Progress Drive, Lincolnton, NC, 28092, USA
AUTHORIZED EU REPRESENTATIVE:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. UTC FIRE & SECURITY
CANNOT PROVIDE ANY ASSURANCE THAT
ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY "AUTHORIZED
DEALER" OR "AUTHORIZED RESELLER", IS
PROPERLY TRAINED OR EXPERIENCED TO
CORRECTLY INSTALL FIRE AND SECURITY
RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
UTC Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.utcfireandsecurity.com or
www.interlogix.com.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
Contact information
www.utcfireandsecurity.com or www.interlogix.com
For customer support, see www.utcfssecurityproducts.eu
2 / 16
DB25 DB9
Pin 2 Pin 3
Pin 3 Pin 2
Pin 5 Pin 8
Pin 4 Pin 7
Pin 7 Pin 5
12 V
100 mA
0 to +50°C
<95% non condensing
or scan the QR code.
DA: Installationsvejledning
Montering af enheden
Kortet har en standard Aritech 'B' printplade, der kan monteres
i et eksisterende Aritech-kabinet
Tilslutninger J2
•
+12 V: 12 V dc forsyning. Maksimalt 100 mA.
•
0 V: Negativ forsyning.
•
D+: RS485-databussens positive datatilslutning.
•
D+: RS485-databussens negative datatilslutning.
Enheder kan være op til 1,5 km fra 4-dørs DGP'en eller
centralenheden, afhængigt af hvilket kabel der bruges. WCAT
52/54 anbefales. 2-parsnoet skærmet datakabel.
Tilslutninger J1
•
TX: RS232-dataoverførsel.
•
RX: RS232-datamodtagelse.
•
CTS: Klar til at sende.
•
RTS: Anmodning om at sende.
•
GND: Isoleret RS232-jord.
LED's
•
TX LED: LED blinker for at angive, at der modtages data
som RS232 og overføres data som RS485.
•
RX LED: LED blinker for at angive, at der modtages data
som RS485 og overføres data som RS232.
Udvidede afstande mellem Titan og
ATS1801
ATS1741 (RS485 til RS232 interface) til PC
ATS1741 (RS232) PC (RS232)
Navne på ben Navne på ben
TX RX
RX TX
CTS *Ikke tilsluttet
RTS *Ikke tilsluttet
GND GND
*Kæden RTS-CTS *Kæden RTS-CTS
ATS1741 (RS485 til RS232 interface) - ATS1741 (RS485 til RS232
interface)
Bemærkninger
ATS1741 ATS1741
(RS485) (RS485)
Tilslutter til en 12 V dc strømforsyning fra én
+12 V +12 V
0 V 0V centralenhed
D+ D+
D+ D+
Fød ikke ATS1741 fra forskellige strømforsyninger,
Advarsel:
medmindre du frakobler +12 V kablet mellem disse enheder.
Sørg for, at strømforsyningerne er isolerede, specielt GND'en
P/N MAINST-ATS1741 (ML) • REV B • ISS 13JUN19
DB25 DB9
3 2
2 3
6, 8, 20 1, 4, 6
– –
7 5
4-5 7-8