Cleaning The Mixer - Silvercrest SSM 550 D1 Instrucciones De Uso

Cleaning the mixer

³
So that you do not injure yourself on the cut-
ters r , clean the mixer jug
handled dishwasher brush.
³
In a case of stubborn soiling, the mixer jug
can also be cleaned in a dishwasher. For this,
always take the mixer jug
described later.
³
Clean the cover w
dishwasher or with the normal washing up.
If you clean the liquidiser directly after use, you can
often achieve a satisfactory and hygienic level of
cleaning with the following alternative:
If you clean the liquidiser directly after use, you can
often achieve a satisfactory and hygienic level of
cleaning with the following alternative:
³
Fill the mixer jug e
add a few drops of mild detergent. Close the
cover and fit the mixer jug
w
block u .
Insert the plug into a mains power socket and
activate the Ice Crush/Clean operation a few ti-
mes, such that the cutter
water at full speed.
Afterwards, rinse the mixer jug
clean water to ensure that all detergent residues
have been removed.
e only with a long
apart, as
e
and the filling cap q
with 750 ml of water and
onto the motor
e
r ploughs through the
out with lots of
e
Should this not dislodge the soiling, you can separate
the lower plastic part of the mixer jug
ters r ) from the the glass part of the mixer jug
e
in a
Glass element
Sealing ring
Cutting blade
Plastic element
³
Remove the mixer jug
³
Turn the plastic element
anti-clockwise, such that it allows itself to be relea-
sed from the glass element
- 45 -
(with the cut-
e
e
from the motor block
e
of the mixer jug
of the mixer jug
:
.
u
e
.
e