Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACH THE BAR BRACKETS.
Do you
have round
or square
crossbars?
If round,
continue to
step 2.
PREPARE WHEELFORK:
Slide bolts into the slot of
the anti-spin pad.
TIGHTEN THE QUICK RELEASE LEVER.
With lever open,
tighten the nut until
the lever closes with
FIRM resistance.
BEFORE DRIVING AWAY:
ATTACHMENT HARDWARE CAN LOOSEN
OVER TIME. CHECK AND TIGHTEN IF
NECESSARY, BEFORE EACH USE.
IF you need Further
technIcal assIstance or
replacement parts:
please contact your dealer or
call us at (888) 925-4621
monday through Friday,
7:00 am to 5:00 pm Pacific time.
1032732C-2/6
If you have
square bars,
loosen the tabs
by bending them
repeatedly.
Attach the
wheel fork to
the bar.
TIGHTEN THE
HEX KEYS
AS MUCH AS
POSSIBLE.
Remove the
tabs with
scissors or
pliers.
INSTALL
YOUR WHEEL.
you may need to
loosen the quick
release lever to
allow loading.
If your wheel is too large to fit
securely with anti spin pad in
place, remove anti spin pad
and install wheel. Secure the
lower rim to the crossbar with
a strap to prevent wheel spin.
This product is covered by
YAKIMA's
"Love It Till You Leave It" Limited
Lifetime Warranty
To obtain a copy of this warranty, go
online to www.yakima.com
or email us at yakwarranty@yakima.
com
or call (888) 925-4621
Attach two
brackets to the bar.
The wheel is secure
only after the lever
closes with firm
resistance.
Publicidad
