Air Outlet; Adapter Bayonet On; Tri-Clamp Tc 50 .5 - Sartorius MD8 Airscan 16746-01-SHB Serie Instrucciones De Instalación

Unidad de aspiración para colector de gérmenes aéreos
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 79
Device Description
3.5

Air Outlet

At the air outlet, the air from the sampling head is directed into the ambient air or
into pipes . The air outlet is designed as a connector piece . The connector piece can
accommodate pipes and adapters .
1
Fig . 5: Air outlet (example)
No.
Designation
1
Connector piece
2
Groove
3
Gasket
3.6
Adapter Bayonet on Tri-Clamp TC 50.5
Sampling heads with a bayonet connection are particularly suitable for applications
where the sampling head is not meant to be installed in a system . This allows for
flexible operating conditions .
Sampling heads with a Tri-Clamp connection (TC 50 .5) are particularly suitable for
installation in systems, e .g . isolators, filling systems and blow-fill-seal machines .
The Tri-Clamp connection (TC 50 .5) allows the sampling heads to be connected to
the pipes of the existing systems .
The adapter from Bayonet to Tri-Clamp TC 50 .5 converts the bayonet connection into
a Tri-Clamp connection . As a result, sampling heads with a bayonet connection can
also be connected to the pipelines of systems .
10
MD8 Airscan Sampling Head Installation Instructions
Description
Allows installation in pipelines using a Tri-Clamp
connection . Is designed as a Tri-Clamp 50 .5 .
Accommodates the seal for the Tri-Clamp connection .
Is installed inside the connector piece . Not depicted .
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md8 airscan 16746-01-sht serie

Tabla de contenido