Maintenance And Care - Flex GE 5 Instrucciones De Funcionamiento

Maintenance and care

WARNING!
Before performing any work, pull out
the mains plug.
Cleaning
WARNING!
Do not use water or liquid detergents.
Regularly blow out the housing interior

and motor with dry compressed air.
Blow out the sanding head and gimbal

bearing with dry compressed air.
Replacing Velcro or backing pad
Take hold of the sanding plate together

with the sanding head to prevent
the sanding plate from turning.
Turn the screw in an anti-clockwise

direction and remove.
Disassemble the sanding head.

14
Replace parts.

Assemble sanding head in reverse

sequence.
Replacing the brush ring
Remove the sanding head (see section

"Replacing Velcro or backing pad").
Loosen the retaining screws.

Take the ring out of the housing.

Insert a new brush ring into the housing

and screw in the retaining screws.
Assemble sanding head in reverse

sequence.
GE 5/GE 5 R/GSE 5 R