PANEL DE CONTROL (DISPLAY)
Speed display: shows on the screen the scooter speed at that time.
1
Battery indicator: There are four electric lights to indicate the amount of electricity.
2
With battery consumption, the power light status will chan- ge from the right to the
left in order of light on, flashing, and extinction. When 4 lights are on, the electricity
is between 100%-86%; when 3 are lights on, the electricity is between 85%-71%.
When the battery is used up, the four lights are all extinct, and the scooter will slide
to the natural stop by inertia, please recharge it before using.
Power button: To turn on the scooter, press and hold the button below the display
3
for several seconds.
Lights on: To turn on the scooter lights, you must press the ignition button only
4
once quickly, if you want to turn them off, you must perform the same operation.
- Activate CRUISE CONTROL mode: Press and hold the accelerator lever at the
same speed for 5 seconds.
- Turn off CRUISE CONTROL mode: Braking with the brake lever, the cruise
control mode will turned off (when decelerating, the cruise control mode is
turn off).
Mode display: The lowest power lamp has a white-green color. When the vehicle
5
is in the normal mode, the light is displayed in white; when the vehicle is in the
energy-saving mode, the light is displayed in green. (Energy saving mode: The
top speed is 25km/h, the throttle is smoother, suitable for beginners to familiarize
with riding).
1 Speed display
2 Battery Indicator
3 Power button (below)
4 Lights on (same)
5 Mode display
EN
23