Hdmi Output; Firware Upgrade - Papago GoSafe 318 Manual Usuario

Output
HDMI
1.Connect the Dashcam to an output device with the HDMI port.
2.Set the signal source on the output device to HDMI.
3.Instead of the Dashcam LCD, image will be displayed on screen of the output device.
4.It supports video/photo recording, playback, and deletion.
Firmware Upgrade
1.Visit the PAPAGO official website at http://us.papagoinc.com.
2.Go to the Product Page—Support Tab".
3.Download the latest version of the firmware and extract it in the root directory of the MicroSD.
4.After copying, insert the MicroSD in the MicroSD socket.
5.Turn on the Dashcam.
6.When the LED indicator begins to blink, this means that the firmware is uploading correctly.
7.After firmware upgrade, the Dashcam will reboot again.
8.Enter "Settings—Version" to check if the firmware is up-to-date.
Before upgrading firmware from the MicroSD, please format the MicroSD on
the Dashcam to ensure read/write stability.
Do not disconnect power supply during firmware upgrade! The Dashcam will
be unable to boot!
English 15