Rear Panel
11. AC INPUT Used for AC input.
12. DANTE port There are two DANTE ports
labeled "primary" and "secondary". Only the
primary Ethernet port needs to be connected,
but if both ports are connected they become
a redundant failsafe. That is, if the primary
port loses communication, the secondary port
quickly takes over. Careful network design and
topology which takes advantage of this fea-
ture can provide extremely high reliability in
critical applications. Each Ethernet port equips
with two LEDs. The yellow LED of the Second-
ary Ethernet port will light to show you that
the Ethernet port is able to use after power
on the DSS. The green LED of the Ethernet
port which connected will flash if there is data
transmitting.
P. 6
AUDIOLAB Live Snake 16.8 -
English version