Ampro Audiolab LIVE SNAKE 16.8 Manual Del Usuario página 9

The matrix is divided into transmitter and receiver
two parts. The devices (two or more) connected to
the same routing appear both in the transmitter
and receiver end, you can select the signal send-
ing through the matrix. Receiver: signal input,
you can send signals to the receiver of any other
device,but it is the only one sending.
About Cat 5
Category 5 cable (Cat 5) is a twisted pair cable
for carrying signals. This type of cable is used
in structured cabling for computer networks
such as Ethernet. The cable standard provides
performance of up to 100 MHz and is suitable
for 10BASE-T, 100BASE-TX (Fast Ethernet), and
1000BASE-T (Gigabit Ethernet). Cat 5 is also used
to carry other signals such as telephony and vid-
eo.The cable is commonly connected using punch
down blocks and modular connectors. Most
Category 5 cables are unshielded, relying on the
twisted pair design and differential signaling for
noise rejection. Category 5 has been superseded
by the Category 5e (enhanced) specification.
Cable standard
The specification for Category 5 cable was de-
fined in ANSI/TIA/EIA-568-A, with clarification in
TSB-95. These documents specify performance
characteristics and test requirements for fre-
quencies of up to 100 MHz. Cable types, con-
nector types and cabling topologies are defined
by TIA/EIA-568-B. Nearly always, 8P8C modular
connectors, often referred to as RJ45, are used
for connecting category 5 cable. The cable is ter-
English version
P. 9
- AUDIOLAB Live Snake 16.8