Operation - Sefa ECLAM V3 Serie Guia Del Usuario

2021-03-25
a� Setting up the machine
Cut the packing straps and undo the cover and dome retai-
ning screws.
Remove the cover and then the dome from the case.
Remove the plastic bag from the machine.
Remove the anchor bolts securing the machine to the pallet.
With the packaging removed, take off the safety screw using
the 4 mm Allen key provided.
Use the carry bars to carry the machine and attach it to a
stable, level table.
Fit and secure the lower platens in place if they are not already
installed.
b� Switching on
Plug in the machine using the power lead provided.
Press the switch at the back of the arm to «1».
The control panel page will be displayed on the touch screen.
This machine must be used by qualified personnel.
Switching on the machine turns on the temperature control,
electronic board and electrical power supplies.
8

OPERATION

TO BE PERFORMED BY QUALIFIED PERSONNEL
DO NOT CARRY THE MACHINE BY THE PLATES
safety screw
www.sefa.fr